 |
|
|
|
Van
Ramps |
|
Handi-Ramp® Van
Ramp Systems |
|
Aluminum Van
Ramps 
Expanded Metal Van Ramps |
Handi-Ramp® Van Ramp System Series
is designed to be mounted in any van or mini-van using a quick and simple
3-Bolt installation, with no modification to your vehicle. They
are made with strong, durable construction of either aluminum or expanded
metal. The ramps fold up vertically inside the van door conserving
passenger space. All of the ramps in the Van Ramp Series are equipped
with "compression shock assisted lifting" for ease of use.
The weights listed below approximate lifting effort. These ramps are all
equipped with a
non-skid walk surface for added safety.
|
|
|
Side Door
Mounted Van Ramp |
Handi-Ramp® Van Ramps also come
in a rear door mounted series.
|
|
|
Rear Door
Mounted Van Ramp |
 |
| Handi-Ramp® Van Ramps |
| The Van Ramp Series
from Handi-Ramp® includes a full range of ramps designed
to be mounted in vans or mini-vans. Handi-Ramp® Van
Ramps are available in 5 foot, 6 1/2 foot (primarily for
mini-vans) and 7 foot lengths to correspond with your individual
needs. The standard width of 26 inches accommodates most
wheelchairs and vehicles. Other widths are available on a
special order basis. |
| |
| THE LOW COST ALTERNATIVE TO A
LIFT |
| The Handi-Ramp®
Van Ramp Series is a low cost alternative to a lift system and
offers the most economical solution for wheelchair transportation
available on the market today. Handi-Ramp® Van
Ramps fold in half and store vertically inside your van conserving
precious passenger space. Handi-Ramp® exclusive
anti-rattle system keeps the ramp quiet when you are on the
road. The Van Ramp Series fits all makes and models of vans
and mini-vans. |
| |
| Easy to Use - Easy to Install |
| All Handi-Ramp®
Van Ramps are lightweight
and can be operated with a minimum of effort by one person.
Equipped with "spring assisted lifting," Handi-Ramp®
Van
Ramps have been designed for ease of use.
Non-skid surface and side
flanges are included on all Handi-Ramp® Van Ramps offering safe
and easy access to your van.
All Handi-Ramp® Van Ramps are
delivered fully assembled and require a simple 3-bolt
installation. Depending upon your vehicle, the ramp will
mount either on the floor of your van or in the step well using
three brackets. No vehicle modification is required, so
resale value is not hurt. Handi-Ramp® Van Ramps can be installed to create
easy access through either a sliding side door or the rear
doors.
|
| |
| Quick-Mount |
| Handi-Ramp®
Quik-Mount mounting system
allows van and RV owners to install and completely remove our ramp in
minutes when not in use. |
| |
| ALUMINUM OR EXPANDED METAL
VAN RAMPS |
| Handi-Ramp® Van Ramps are
manufactured from either aluminum or expanded metal. Both have their
advantages: the aluminum, requires less lifting effort and has the
best non-skid surface available. The expanded metal van ramp is less
expensive and provides better visibility for the driver and passengers
when folded up in the van. |
| |
| OPTIONAL STEPS |
| The aluminum van ramp
is available with steps built right into the surface of the
ramp. This features provides an exceptionally safe and
convenient method for moving in and out of the vehicle. This
option also enables individuals who have some limitations on their
walking or stepping capabilities a safe and independent way to
enter and exit the vehicle. |
| |
| 4 POINT TIE DOWN (4TD) |
| The 4 Point Tie Down
(with Optional Lap Belt) provides the ultimate in strength and
safety. It secures even heavy weight, motorized
wheelchairs. The 1" wide strap assemblies provide easy
attachment to virtually all mobility aid designs. The
various options of the system floor tracks or plates allow you to
choose the configuration that best serves your needs. |
| |
| HANDI-CLAMP |
| The Handi-Clamp (sold
in pairs) will easily anchor a wheelchair to the floor of your van
providing safe, hassle-free transportation. The Handi-Clamp
mounts to the floor of the van and then clamps through the wheel
of the chair. Clamps fit all standard size wheelchairs with
spoke wheels. |
| |
| WHEELCHAIR TIE DOWN |
| The Handi-Ramp® Wheelchair Tie Down
securely fastens a wheelchair in a van. The eye is mounted to the
floor of the van and the wheelchair fitting tightens down onto the
frame of the wheelchair holding it securely in place. To fit this
properly to your chair we need the inner frame measurement when
placing an order. |
| Van
Ramps and Accessories |
|
Product |
Number |
Capacity |
Lift
Effort |
Price |
| Aluminum
Van Ramps |
| 5
ft long |
AV60 |
750
lbs |
17
˝ lbs |
$
899.00 |
| 6
˝ ft long (mini vans) |
AV78 |
750
lbs |
19
˝ lbs |
$
1089.00 |
| 7
ft long |
AV84 |
750
lbs |
20
lbs |
$
1119.00 |
| Expanded
Metal Van Ramps |
| 5
ft long |
EV60 |
1000
lbs |
30
lbs * |
$
819.00 |
| 6
˝ ft long (mini vans) |
EV78 |
1000
lbs |
34
lbs * |
$
879.00 |
| 7
ft long |
EV84 |
1000
lbs |
35
lbs * |
$
899.00 |
| Wheelchair
Clamps & Tie Downs |
| 4
Point Tie Down |
4TD |
|
7
lbs |
$229.00 |
| Wheelchair
Tie Down |
HRTD |
|
5
lbs |
$159.00 |
| Wheelchair
Clamp |
HRC |
|
6
lbs/pair |
$169.00 |
Handi-Ramp®
Quik Mount
(enables
you to install and remove your Van Ramp in minutes) |
| Quik
Mount |
QM |
|
8
lbs |
$179.00 |
| *All
van ramps are equipped with "compression shock assisted lifting".
The weights listed approximate lifting effort. The standard
van ramp width is 26". Wider ramps are available on
a special order basis. |
Van Ramps can now be sent via UPS
to most destinations, resulting in big shipping cost savings!
Alternatives to using the
mounted van ramp include Super
Duty Traks used in conjunction with
a Stabilizer
Kit or a Folding
Portable Ramp in either aluminum
or expanded metal.
Handi-Ramp® products are available
across North and Central America including Alaska, Hawaii, Canada and
Puerto Rico.
You can call us toll free, at (800) 876-RAMP
to discuss your specific needs.
Email
Handi-Ramp
|
 |
|
|
